trespa-zagen.jpg.webp

Trespa saws - circular saws for Trespa

Trespa® is the brand name for High Pressure Laminate (HPL) panels and is perhaps the largest and best known HPL brand in the Netherlands. Trespa panels are extremely suitable for outdoor use thanks to the durability of the material. The material is extremely weather resistant and sun, rain and UV radiation have no effect on the material. Trespa is therefore often used for facade cladding, windshields and fascias. In addition, Trespa can also be used for many other applications such as furniture for laboratory, research and educational environments, advertising signs and as a material for printing photos for the wall.

Trespa is a hard durable panel material with a dense structure due to the combination of wood fibers, paper and thermosetting resins. These materials are pressed together under high pressure resulting in a panel material that has many similarities to hardwood.

View range of Trespa saws

Can I saw Trespa?

Because Trespa® panels are of high and solid quality, many people ask whether Trespa panels are easy to saw. With the right tools and technique sawing Trespa is no problem at all. Sawing Trespa is best compared to sawing hardwood. Cutting Trespa with a hand saw is therefore not recommended. A Trespa panel can best be sawn with a jigsaw or circular saw blade.

We recommend always sawing Trespa with a circular saw for Trespa to ensure a nice tight cut. The most important thing when sawing Trespa is a sharp saw blade with fine teeth. For cutting Trespa we recommend choosing a change tooth or trapezoidal flat tooth circular saw blade. For cutting depth, it is recommended to take three to four times the panel thickness. When sawing Trespa, it is further important to have the saw blades of the saw blade enter the side with the decoration layer.

When sawing Trespa with a circular saw blade, the best results are achieved with a high RPM. With a high RPM, the saw blade cuts smoothly through the material. It is also important when sawing Trespa that the blade of the circular saw is completely flush with the panel when cutting the Trespa panel.

Cirkelzaag voor het zagen van Trespa plaatmateriaal

Trespa circular saw blade for cutting Trespa

Do you need to cut in Trespa for a new project? Or are you looking for a replacement circular saw blade for cutting in Trespa? Then it is best to choose a circular saw specifically designed for cutting solid panel material such as Trespa. A circular saw blade suitable for cutting Trespa has a trapezoidal flat tooth. This will give you the best cutting results when sawing Trespa. It is also advisable to use a cutting depth of three to four times the panel thickness and to ensure that the saw blade for Trespa is sharp.

In our assortment we have several high-quality circular saws that are extremely suitable for cutting Trespa and other solid panel materials such as HI-MACS, Corian and carbon fiber reinforced plastic. Our best selling Trespa circular saw is the Trespa saw from Freud. This high-quality saw blade from Freud is equipped with a roof tooth with positive cutting angle and is therefore ideally suited for Trespa cutting and cutting in HPL and other solid plastics.

In addition, our Quwoto circular saw blade with roof tooth is also very suitable for sawing in Trespa and other sheet materials. This saw blade is low-noise and is available in various diameters so that there is always a suitable circular saw blade for cutting Trespa.

Do you want to saw Trespa with a handheld circular saw? We also have the right Trespa circular saw blade for handheld circular saws. Wondering which saw blade for manual circular saw machine is suitable for your job? View our range of saw blades for portable circular saws.

Handicraft saws for Trespa

Diamond saws for Trespa operations

Besides milling Trespa with diamond cutters, Trespa is also commonly sawed with a diamond saw blade. A diamond circular saw blade is available for both the format saw and the panel saw. Depending on the height of the diamond deposit, the saw blade for Trespa can be re-sharpened up to 12 times.

Do you have questions about sawing Trespa panels with a circular saw blade, do you want to know which saw blade can best be used for cutting Trespa or are you looking for a Trespa saw? Please contact us, we will be happy to help you.

Saw blades for Trespa

Discover our range of high-quality circular saws for Trespa

View the assortment

Frequently asked questions about Trespa milling:

Can you cut Trespa?

Do you have a task on your to-do list that involves sawing Trespa? Don't let stories about the difficulty of sawing Trespa discourage you. With the right saw, it is as easy to machine as any other sheet material. Trespa is best cut using a jigsaw or circular saw. To cut Trespa, follow these steps: - Always wear proper personal protective equipment, such as safety glasses and hearing protection - Choose the right cutting tool: Use a fine saw blade with carbide teeth - Mark the cutting line. Use a pencil and ruler or other straight guide tool to accurately mark the cut line - Provide support. Make sure the Trespa panel is well supported during cutting. If the panel hangs freely, it may vibrate and lead to splinters or an inaccurate cut - Maintain a moderate cutting speed to avoid overheating the saw blade and possible damage to the material - If necessary, you can use sandpaper or a router to remove sharp edges after cutting.

What can you use to saw Trespa?

Trespa, also known as HPL (High Pressure Laminate), is best cut using a jigsaw, circular saw or handheld circular saw. Cutting Trespa with a hand saw is not recommended due to the hardness of the material. Prevent damage to the HPL panels by selecting the appropriate saw blade. If you use the appropriate saw blade, you can also consider using another circular saw machine, such as a crosscut saw or a saw table with an integrated circular saw.

What should you pay attention to when sawing Trespa?

When sawing Trespa, there are a number of points to watch out for the best result. A saw blade with changing teeth or a trapezoidal flat tooth is ideal for sawing Trespa with a (manual) circular saw blade. Set the depth of cut to 3 to 4 times the thickness of the panel. Run the saw across the back of the panel. Make use of the splinterguard. If it is not present on your tool, be sure to tape the saw line with thick painter's tape.